Gigaset C530 ip User Manual page 57

Configuring the system settings
Automatic update for the VoIP provider settings
After the first download of the VoIP provider settings, your phone will check daily whether a
newer version of the file for your VoIP provider is available via the Internet on the configuration
server.
Auto configuration has been used to download VoIP settings (
If there is new configuration data, this is automatically downloaded to your phone (without
notification).
Manual VoIP configuration with the IP wizard
If there is new provider data, the idle display on the handset displays the message New profile
available.
¤
Confirm prompt by pressing Yes.
The new data for your VoIP provider will be downloaded and saved on the phone.
If you respond to the prompt with No, the handset returns to idle status. Your telephone will not
remind you of this new profile again. The message will only be shown again if a newer version of
the provider data is available.
A profile update will only be started if no other profile or firmware update is taking place at the
time.
Assigning send and receive connections to internal participants
If you have several connections configured for your telephone system, you can do the following
for each internal participant:
u
Assign a send connection or allow the internal participant to select the connection for each
external call (select line).
u
Assign one or several receive connections. Only calls received via one of the assigned
connections are signalled on the device.
Assigning a send connection
Prerequisite: You have configured at least one VoIP connection on your phone.
v Ï
¤ ¤ ¤ q Telephony
OK
A list of handsets is displayed.
q
¤
Select the handset that should be assigned a new send connection.
r
¤
Choose a connection as the send connection. All configured connections are offered
with the names you have set.
If more than one connection is configured, Sel. at each call is also offered. For each call, you can
then select a connection over which the relevant conversation should be established.
The Gigaset.net connection is not included in the selection for the send connections.
Gigaset.net numbers (suffix #9) are automatically dialled via Gigaset.net.
Note
If the send connection on a handset is deleted or deactivated, the fixed line network
connection is assigned to it as the send connection.
56
¤
Enter the system PIN if required.
¤ ¤ q Send Connections
OK
¤
Save
¢
page 17)
¤
OK
¤
OK
¤
OK