Installing The Base Station And Charging Cradle - Gigaset C530 ip User Manual

Getting started
10 Power adapter to connect the charging cradle to the mains power supply
11 Brief introduction with installation wizard for your telephone, license texts, warranty
agreement and links to important websites.
In the event of any firmware updates for your base, the user guide is also updated if
necessary and available to download online from www.gigaset.com.
Firmware updates
This user guide describes the functions of your phone from firmware version 080 onwards.
Whenever there are new or improved functions for your Gigaset, firmware updates are made
available for you to download to your base (
changes when using your phone, a new version of this user guide or the necessary
amendments will be published on the Internet at
www.gigaset.com.
Select the product to open the relevant product page for your base, where you will find a
link to the user guides.
To find out what version of firmware is currently loaded,

Installing the base station and charging cradle

The base and charging cradle are designed for use in closed, dry rooms within a temperature
range of +5°C to +45°C.
¤
Set up the base at a central point in the building or house, or mount the base on the wall
¢
( page 163).
The phone's feet do not usually leave any marks on surfaces. However, due to the multitude of
different varnishes and polishes used on today's furnishings, marks on the surfaces cannot be
completely ruled out.
Caution
u
Never expose the telephone to heat sources, direct sunlight or other electrical
appliances.
u
Protect your Gigaset from moisture, dust, corrosive liquids and fumes.
u
Pay attention to the range of the base. This is up to 50 m inside buildings and up to 300 m
in unobstructed outdoor areas. The range is reduced when Maximum Range is
¢
deactivated (
8
page 98).
¢
page 57). If this results in operational
¢
page 140.