Firmware - Gigaset N870 IP PRO Installation, Configuration And Operation

System settings

Firmware

Regular updates to the firmware for the Integrator/DECT manager and base stations are
provided by the operator or supplier on a configuration server. You can upload these updates
onto the Integrator/DECT manager as required. If a firmware update is provided in the form of
an update file, you can store it on your computer and download it from there.
The base stations' firmware is updated automatically by the DECT manager.
¤
Settings System
Firmware of the local system
Current version
Shows the current firmware version of the Integrator/DECT manager on which you are logged in.
Backup available for previous version
You can downgrade the firmware by installing any older version. When installing a new firmware
the system automatically creates a data backup for the recent firmware. If you later downgrade
to this version the data backup will be installed on the system. This way you have a downgrade
to previous firmware version and data settings.
Downgrade to any other version will reset the device to factory settings.
Selecting the firmware update file
¤
In the URL to firmware file text field specify the URL of the configuration server where the
firmware is located
or
¤
Click Browse... and select the firmware file from your computer's file system.
Starting the firmware update
¤
At a specific date:
¤
Immediately:
Confirmed schedule
Shows Immediately or the date for the next planned firmware update.
¤
Click on Set to save the settings and to start the firmware update.
Once the update process starts, the system updates the DECT manager and all subordinate base
stations automatically. No action is needed. The handsets lose their connection to the bases
during the updating process. You can tell that the update has been successful when the hand-
sets re-establish the connection to the base.
You can monitor in the base station list the current version of base station and the base stations
and DECT managers offline most likely for firmware update.
84
Firmware
Deselect the check box Immediately
format: YYYY-MM-DD HH:mm
Select the check box next to Immediately (default) . . . the firmware
update is started when you click on the Set button.
Enter the exact start time in the