Section 2: Framing - Montigo H38DF PFC Installation & Maintenance Manual

Section 2: Framing

Frame in the enclosure for the unit with framing materials. The
1).
framed opening for the assembled fireplace is 23 3/4" wide, x 44"
high x 41" deep, see Figure 2
NOTE: When constructing the framed opening, please ensure there is
access to install the gas line when the unit is installed. See Figure 21�
23 3/4
44
Figure 2� Framing dimensions.
Combustible Header
Combustible Shelf
12" Max.
11"
Min.
33"
Exterior
Wall
Figure 3� Combustible Framing for shelves over the fireplace, Rear vent.
Combustible Header
Combustible Shelf
2" Min.
PEL Short
90 elbow
46" Min
58" Min for HP
Exterior
Wall
Figure 4� Combustible Framing for shelves over the fireplace, Top vent.
XG0816 - 150204.1
Installation
.
41
4" Nailing flange
or Non-combustible
material.
44"
17 1/2"
Min.
4" Nailing flange
or Non-combustible
material.
44"
Top Vent
Min. 1 "
Combustible
Header
84"
min.
44"
Figure 5� Non Combustible Framing with alcove above fireplace, Top Vent.
Note: Images are shown without screens for clarity purposes. However,
your fireplace should not be operated without proper installation of
screens.
H*38DF PFC Peninsula Gas Fireplace
Ceiling level
Non-Combustible
materials. Alcove
over fireplace.
Non-Combustible
Header
Non-Combustible
Materials, with Low
profile mantel / Alcove
2"
over fireplace.
39 5/8"
Floor
Page 7