H*38DF PFC Peninsula Gas Fireplace
Installing the HP38PF* Logs and Embers
Bottom Logs
The HP38PF* is supplied with seven (7) fibre logs. The two bottom logs
("A" & "B") are mounted on the burner grate as shown in Figure 26a�
Top Logs
Place logs "C" & "D" into their diagonal positions as shown in Figure
26b� Log "E" is mounted on top of log 'C" as shown in Figure 26c. Place
log "F" into slot at the side of the unit as seen in Figure 26d. Log "G" is
to be mounted onto of log "D" as shown in Figure 26e.
Installing the Ember Material
*
Figure 26� Place the provided embers in the 5 pronged ember holders.
Be sure to not directly cover any of the burner holes.
* Do NOT cover burner with embers on the side facing the side view glass
See Figure 1 for Side View
Log B
Figure 26a� Place Log A and B in the grate on either side of the burner.
Log C
Figure 26b� Place Log C and D diagonally across Logs A and B.
Log E
Figure 26c� Place Log E diagonally across Log C.
Ensure that log E does not touch the grate.
Page 26
Installation
Log G
Figure 26d� Place log F into slot at the side of unit.
Log A
Figure 26e� Place log G diagonally across log D. Log placement complete.
Log D
Figure 26g� Evenly spread provided lava rock in tray
Log F
Log F
NOTICE
If logs are not placed properly, excessive sooting will result.
Log G
XG0816 - 150204.1