Table of Contents
Advertisement
3
.
1
2
.
8
M
a
n
a
g
3
.
1
2
.
8
M
a
n
a
g
This page allows you to manage the settings for access control, access list, port setup, and
SMP setup. For example, as to management access control, the port number is used to
send/receive SIP message for building a session.
Available parameters are explained as follows:
Item
Enable
HTTP/HTTPS/ICMP
Ping/Telnet
Access List
Management Port Setting
After finishing all the settings here, please click OK to save the configuration.
VigorFly 210 Series User's Guide
e
m
e
n
t
e
m
e
n
t
Description
Enable the checkbox to allow system administrators to login
from the Internet. There are several servers provided by the
system to allow you managing the router from Internet.
Check the box(es) to specify.
You could specify that the system administrator can only
login from a specific host or network defined in the list. A
maximum of three IPs/subnet masks is allowed.
List IP - Indicate an IP address allowed to login to the router.
Subnet Mask - Represent a subnet mask allowed to login to
the router.
Specify user-defined port numbers for the Telnet, HTTP and
HTTPS servers.
163
Hide quick links:
Advertisement
Table of Contents
