Draytek VigorFly 210 User Manual page 50

Details Page
Advanced
This button will open different web page according to the
access mode that you choose in WAN interface.
This button allows you to configure DHCP client options.
DHCP packets can be processed by adding option number and
data information when such function is enabled and
configured.
Enable – Enable the function of DHCP Option. Each DHCP
option is composed by an option number with data. For
example,
Option number:100
Data: abcd
When such function is enabled, the specified values for DHCP
option will be seen in DHCP reply packets.
Option Number – Type a number for such function.
:
Note If you choose to configure option 61 here, the
detailed settings in WAN>>Internet Access will be
overwritten.
DataType – Choose the type (ASCII or Hex) for the data to
be stored.
Data – Type the content of the data to be processed by the
function of DHCP option.
42
for WAN2
VigorFly 210 Series User's Guide