Draytek VigorFly 210 User Manual page 122

Hide SSID
SSID
Isolate LAN
Isolate Member
IGMP Snooping
Channel
Extension Channel
Packet-OVERDRIVE
Check it to prevent from wireless sniffing and make it
harder for unauthorized clients or STAs to join your
wireless LAN. Depending on the wireless utility, the user
may only see the information except SSID or just cannot
see any thing about Vigor wireless router while site
surveying. The system allows you to set three sets of SSID
for different usage.
Set a name for the router to be identified.
Wireless clients (stations) with the same SSID can access
for each other through Access Point and access Internet via
WAN interface; however, they cannot access wired PCs on
LAN.
Wireless clients (stations) with the same SSID cannot
access for each other through Access Point; however, they
can access wired PCs on LAN and access Internet via WAN
interface.
Check the box to activate IGMP snooping for the station
which access into Internet through such SSID.
Means the channel of frequency of the wireless LAN. The
default channel is 6. You may switch channel if the selected
channel is under serious interference. If you have no idea of
choosing the frequency, please select AutoSelect to let
system determine for you.
Such channel will be brought out automatically when you
determine the Channel selection.
It can help to extend the bandwidth for wireless connection.
Such value can be modified manually.
This feature can enhance the performance in data
transmission about 40%* more (by checking Tx Burst). It
is active only when both sides of Access Point and Station
(in wireless client) invoke this function at the same time.
114
VigorFly 210 Series User's Guide