Table of Contents
Advertisement
Available settings are explained as follows:
Item
Username
Password
Confirm Password
Tunnel Broker
Tunnel Mode
Auto-reconnect Delay
Keepalive
Keepalive Interval
Prefix Length
VigorFly 210 Series User's Guide
Description
Type the name obtained from the broker.
Type the password assigned with the user name.
Type the password again to make the confirmation.
Type the address for the tunnel broker IP, FQDN or an
optional port number.
IPv6-in-IPv4 Tunnel- Let the broker chose the tunnel
mode appropriate for the client.
IPv6-in-IPv4 (Native) - Request an IPv6 in IPv4 tunnel.
IPv6-in-IPv4 (NAT Traversal - Request an IPv6 in UDP
of IPv4 tunnel (for clients behind a NAT).
After passing the time set here, the client will retry to
connect in case of failure or keepalive timeout.
0 means not retry.
Check the box to keep the connection between TSPC and
tunnel broker always on. TSPC will send ping packet to
make sure the connection between both ends is normal.
Type the time for the interval between two keepalive
messages transferring from the client to the broker.
Type the required prefix length for the client network.
141
Hide quick links:
Advertisement
Table of Contents
