Wps - Draytek VigorFly 210 User Manual

Available settings are explained as follows:
Item
Policy
MAC Address Filter
3 . 1 0 . 5 W P S
3 . 1 0 . 5 W P S
WPS (Wi-Fi Protected Setup) provides easy procedure to make network connection between
wireless station and wireless access point (vigor router) with the encryption of WPA and
WPA2.
It is the simplest way to build connection between wireless network clients and vigor router.
Users do not need to select any encryption mode and type any long encryption passphrase to
setup a wireless client every time. He/she only needs to press a button on wireless client, and
WPS will connect for client and router automatically.
Note: Such function is available for the wireless station with WPS supported.
There are two methods to do network connection through WPS between AP and Stations:
pressing the Start PBC button or using PIN Code.
On the side of VigorFly 210 series which served as an AP, press WPS button once on the
front panel of the router or click Start PBC on web configuration interface. On the side of a
Description
Select to enable any one of the following policy or disable
the policy. Choose Activate MAC address filter to type in
the MAC addresses for other clients in the network
manually. Choose Isolate WLAN from LAN will separate
all the WLAN stations from LAN based on the MAC
Address list.
Display all MAC addresses that are edited before.
Client's MAC Address - Manually enter the MAC address
of wireless client.
Add - Add a new MAC address into the list.
Delete - Delete the selected MAC address in the list.
Edit - Edit the selected MAC address in the list.
Cancel - Give up the access control set up.
126
VigorFly 210 Series User's Guide