Table of Contents
Advertisement
44
Fireback Installation
Fireplace must not be operated without the firebacks in place.
The directions below show installation of metal firebacks. If using ceramic firebacks, follow the
directions included with the firebacks (the rear fireback clips are removed and discarded).
1
Access the firebox.
2
Remove the two rear fireback clips from the firebox ceiling (1/4" nutdriver). The clips are located along the
upper rear edge of the firebox.
3
Install the rear fireback. Hold the fireback at an angle while installing to allow it to pass through the firebox
opening.
4
Replace the rear fireback clips to secure the rear fireback in place.
© Travis Industries
Installation
(for qualified installers only)
The fireback clip has a
keyhole slot. It can be
removed by loosening
the screw and sliding
the clip out.
4140731
100-01366
Hide quick links:
Advertisement
Table of Contents
