Daikin 3MKS50E3V1B Service Manual page 255

Super multi nx e / f / g / k-series
Hide thumbs Also See for 3MKS50E3V1B:
Table of Contents

Advertisement

SiBE121135
The
button is used to exit browsing at once
(without having to scroll through all programmed
actions).
Press the
button to enter the browse mode, the
icon appears,
NOTE
Browsing always starts on Monday and
ends on Sunday.
Check the
programmed for Monday,
The clock indicates the time when the programmed
action is scheduled, either
is being displayed.
The temperatures mentioned above are
NOTE
for clarifying purposes only, temperature
values on your controller may vary.
If
does not appear, it indicates that there are no
programmed actions for Monday.
Press the
button again to go to the next day of
the week.
will blink, this indicates that the
programmed actions for Tuesday are being browsed.
The process described above is now restarted.
If at least 1 action is programmed for Tuesday,
appear. The clock indicates the time when the
programmed action will be enabled, either
or
and
If
does not appear, it indicates that there are no
programmed actions for Tuesday.
Press the
button to display the next programmed
action. If a second action is programmed for Tuesday,
will still be blinking and
Assuming that 5 actions were programmed for
Tuesday, a total of 5 presses will be required to
display all programmed actions.
Operation manual
9
Operation Manual
will blink.
icon. If at least 1 action is
will appear.
,
or
and
will
,
is being displayed.
will appear.
Continue pressing the
button until the day of the
week indicator displays the current day (not blinking),
you have now quit browsing.
NOTE
The number of times that the
will have to be pressed to quit browsing
depends on the number of programmed
actions in the schedule timer.
How do I interpret the programmed
actions
To be able to understand the behaviour of your
installation when the schedule timer is enabled, it is
important to look at all programmed actions for the
current day and maybe the last programmed action of
yesterday.
If the first programmed action for today is not active
yet, the current status of your installation depends,
most probably but not necessarily, on the last
programmed action from yesterday. Read the
important note below.
If the first programmed action for today is already
active, the current status of your installation depends,
most probably but not necessarily, on the parameters
programmed in the first programmed action for today.
Read the important note below.
NOTE
To keep the operation of your installation
simple, the schedule timer settings can
easily be overruled by altering the current
setting ("last command" overrules
previous command until next scheduled
command).
Conclusion: Although
is displayed, somebody
might have altered the settings. The next
programmed action will overrule the altered settings
and all settings return as programmed.
SA Indoor Unit
button
BRC1D528
Remote controller
4PW23717-1
243

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents