Ricoh SP 311DNw Getting Started Manual page 42

Encryption Select encryption method based on chosen Authentication method.
WPA Passphrase If [WEP] is selected for Encryption method, enter enabled fields. If [WPA2-PSK] or
WEP Key Length Select 64 bits or 128 bits for the length of the WEP encryption key.
WEP Transmit
Key ID
WEP Key Format Select a format for entering the WEP key.
WEP Key Enter the WEP key. The number and type of characters you can enter vary
5. When finished, click [OK] to save changes.
6. Close web browser.
7. Disconnect Ethernet cable.
8. Turn printer power switch Off. Wait a moment, and turn On.
9. Next, install Printer Driver & Utility. See
Note:
For further information on Web Image Monitor, please refer to the User Guide, p49.
•
Open System: Choose [None] or [WEP]
•
Shared Key: [WEP] only
•
WPA2-PSK: Choose [CCMP (AES)] or [TKIP/EAS]
•
Mixed Mode WPA/WPA2: Choose [CCMP (AES)] or [TKIP/EAS]
•
[Mixed Mode WPA/WPS2] is selected for Authentication, enter enabled fields.
Select an ID number to identify each WEP key in case multiple WEP connections
are configured.
depending on the length and format selected for the key, as follows:
WEP key length: [64bits], Format: [Hexadecimal]
•
WEP key max length: 10 characters (0-9, A-F, a-f)
WEP key length: [64bits], Format: [ASCII]
•
WEP key max length: 5 characters (ASCII characters)
WEP key length: [128bits], Format: [Hexadecimal]
•
WEP key max length: 26 characters (0-9, A-F, a-f)
WEP key length: [128bits], Format: [ASCII]
•
WEP key max length: 13 characters (ASCII characters)
3.2 Network Quick
RICOH SP 311DNw B&W Network Laser Printer
Install.
Getting Started Guide
42