Ricoh SP 311DNw Getting Started Manual page 31

h. Select a folder to add a program icon to;
Accessories is recommended. You can also change
the name that will display along with the icon.
i. After making selections, if any, click [Next >].
j. Choose one of the following methods to allow
SOM to identify your printer.
- Local (USB) Connection: If your computer is locally
connected to the printer via a USB cable, click [OK].
SOM will then look for that device's USB printer
driver.
- Network Connection (wired/wireless): Click the drop-
down [ ] and select [Connect Printer]. Enter IP

address and click [OK]. You can also select [Search
Network Printer]. SOM will look for printers on the
network. Select RICOH SP 311DNw from list and click
[OK].
Note:
If you do not know your printer's IP address, print a
•
test page from the printer's control panel. Press
and hold the [Job Reset] key, while turning the
printer On. Continue to hold [Job Reset] for 6
seconds, and then release. Test Page prints. IP
address is in lower right-hand corner of page.
k. Click [Finish].
Note:
For more information, see
•
Connection Status
Monitor
For additional details, see the User Guide (p60).
•
Important:
To open SOM, click [Start]
•
Monitor Status].
RICOH SP 311DNw B&W Network Laser Printer
Appendix A: Check
and Using Smart Organizing
[Smart Organizing

Getting Started Guide
31