Finishing Devices - Xerox Color 800i System Administration Manual

Profiles

Finishing Devices

If your machine has an optional, third-party, Digital Finishing Architecture (DFA) device
attached, then this profile feature is available.
Prior to physically attaching the third-party, DFA device to the machine, device profiles
are created. These profiles describe the DFA device to the machine. Those entered values
will appear on the Finishing Devices option for each specific profile created. Refer to the
third-party, DFA customer documentation for information on setting the profile values
for the specific DFA device that is attached to the machine. You may also call your
Customer Support Center for more information.
Xerox ® Color 800i/1000i Presses Xerox ® Color 800/1000 Presses 6-23
System Administration Guide