Selecting The Tray Options Settings - Xerox Color 800i System Administration Manual

Presses

Hide thumbs Also See for Color 800i:

Table of Contents

• Tray Priority: Sets the priority order for automatic tray selection. If the Auto Tray

Switch Timing feature is enabled and each paper tray contains the same paper size

and weight, the machine feeds paper from the tray set at Priority 1. If there is no

paper in the Priority 1 tray, the Priority 2 tray is automatically selected and so on

Selecting the Tray Options settings

Choose the default settings for the following options:

1. Logon as Administrator.

2. Select the System Settings button.

3. Select the Tray Options tab.

4. Select the default setting for:

• Auto Tray Switch Method

• Manual Tray Switching

• Do Not Include for Temporary Stock

5. Select the desired Tray Properties Timeout Window option.

6. Set the default tray priority levels for all attached trays:

a) Click once on the desired tray in the Tray Priority list.

b) Click the up/down arrow button to move the tray up or down in the priority list.

c) Repeat the above two steps for each tray attached to your machine.

Note

You cannot set the same paper tray for more than one priority level at a time.

7. Select OK to save your changes and close the System Settings window.

8. Select Logoff to exit the Administrator mode.

Table of Contents

Color 1000i Color 800 Stacker 1000