Automatic Alignment (Full Width Array) - Xerox Color 800i System Administration Manual

• Magnification: Use this feature to correct for image stretch from side 1 to side 2. The
image may be enlarged or reduced as necessary.
Tip
It is recommended that you choose only one Alignment profile feature (such as skew),
and then run a set of test prints to evaluate the skew on that output. If you want to
adjust multiple Alignment profile features, individually select each feature, run some
test prints for that feature, and evaluate the output. After you determine that the output
for the selected feature is acceptable, then you can select another Alignment profile
feature to adjust.
Tip
When making adjustments to multiple items, adjust the image in the following order:
Perpendicularly adjustment, then Skew adjustment, then Magnification adjustment,
and finally Registration adjustment.

Automatic Alignment (Full Width Array)

The automatic alignment feature automatically performs corrective registration,
perpendicularity, skew, and magnification adjustments for you.
1. Logon as Administrator.
2. Select the Profiles button.
The Profiles window opens.
3. Ensure that the Alignment tab is displayed.
Alignment should be first tab displayed after selecting the Profiles button from the
main UI.
4. Select New or Edit to create a new alignment profile or to edit/modify an existing
Alignment profile.
Either the New Profile Properties or the Edit Profile Properties window opens.
5. If desired, enter a new name or modify the existing name.
Xerox ® Color 800i/1000i Presses Xerox
System Administration Guide
® Color 800/1000 Presses
Profiles
6-5