Charge Corotron Cleaning - Xerox Color 800i System Administration Manual

2. Select Maintenance from the main UI.
The Maintenance window opens.
3. Select the Maintenance tab.
4. Select the desired dry ink/toner(s) to be cleaned.
5. Select the Start Cleaning button to begin the cleaning process.
6. Select the desired paper tray and feed orientation (Long Edge Feed, or Short Edge
Feed).
7. Select the Start button to begin.
When the process is complete, a "Cleaning is complete" message will appear on the
screen.
8. Select the Close button to exit and return to the main UI.
Related Topics:
Logging on as Administrator

Charge corotron cleaning

Perform the following steps to clean one or all of the charge corotrons.
1. Logon as Administrator.
2. Select Maintenance from the main UI.
The Maintenance window opens.
3. Select the Maintenance tab.
4. Select the desired corotron(s) to clean.
5. Select the Start Cleaning button to begin the cleaning process.
When the process is complete, a "Cleaning is complete" message will appear on the
screen.
6. Select the Close button to exit and return to the main UI.
Related Topics:
Logging on as Administrator
Xerox ® Color 800i/1000i Presses Xerox
System Administration Guide
® Color 800/1000 Presses
Maintenance on UI
2-3