Xerox Color 800i System Administration Manual page 20

Test Print option
The Manage Stock Library window opens.
3. Perform one of the following:
a) Select the Create New button or
b) Select the desired stock from either the RML or the Stock Library list, and then
select the Copy button or
c) Select the desired stock from either the RML or the Stock Library list, and then
select the Properties button.
Either the New Stock Setup window or the Stock Properties window opens.
4. Modify the attributes as required.
5. Select the Advanced Setup button.
The Advanced Stock Setup window opens.
6. Select the desired 2nd Bias Transfer Roll settings for Side 1 and/or Side 2 as required
by using the up/down arrow buttons.
7. Select the 2nd Bias Transfer Roll Test Print button.
The Test Print Setup - 2nd Bias Transfer Roll window opens.
8. Select the desired test print settings and select Start.
Once the test prints are completed, the machine displays the following message:
3-6 Xerox ® Color 800i/1000i Presses Xerox ® Color 800/1000 Presses
System Administration Guide