Sided Option; Correcting The Paper Curl - Xerox Color 800i System Administration Manual

Paper curl correction

2 Sided option

Select the Edit Settings button and the desired settings for two-sided only print jobs.
• 2 Sided Curl Correction: Select either Default or from the Custom pull-down menu,
select the setting that best describes the curl issues on your 2-sided output.
• Front Print Density: Enter the desired print (dry ink/toner) density amount as required;
amounts range from zero to seventy percent. If your output is a high dry ink/toner
coverage area on the output, you may want to enter a higher print density amount.
The system default value is 10%.
• Black Print Density: Enter the desired print (dry ink/toner) density amount as required;
amounts range from zero to seventy percent. If your output is a high dry ink/toner
coverage area on the output, you may want to enter a higher print density amount.
The system default value is 10%.
Tip
You may need to run several test prints, evaluate the output, and readjust the values
before achieving your desired output.

Correcting the paper curl

Use this procedure when selecting/setting paper curl correction options for a stock entry
(either a new permanent stock or a modification to an existing stock).
1. Logon as Administrator.
2. Select Stock Library.
The Manage Stock Library window opens.
3. Perform one of the following:
a) Select the Create New button or
b) Select the desired stock from either the RML or the Stock Library list, and then
select the Copy button or
c) Select the desired stock from the Stock Library list, and then select the Properties
button.
Either the New Stock Setup window or the Stock Properties window opens.
4. Modify the attributes as required.
5. Select the Advanced Setup button.
The Advanced Stock Setup window opens.
6. Select the Edit Settings for the desired Paper Curl Correction option (1 Sided-Face
Up, 1 Sided-Face Down, and/or 2 Sided) as required.
The Paper Curl Correction Setup window opens for the selected 1-sided/2-sided option.
7. Select the desired curl correction option (Default or an option from the Curl Correction
pull-down menu).
8. Select the Test Print button.
The Paper Curl Correction Test Print window opens.
4-4 Xerox ® Color 800i/1000i Presses Xerox ® Color 800/1000 Presses
System Administration Guide