Sided-Face Up Option; Sided-Face Down Option - Xerox Color 800i System Administration Manual

1 Sided-Face Up option

Select the Edit Settings button and then the desired settings for one-sided only print
jobs that will exit the machine in the face-up position.
• 1 Sided Face Up Curl Correction: Select either Default or from the Custom pull-down
menu, select the setting that best describes the curl issues on your output.
• Front Print Density: Enter the desired print (dry ink/toner) density amount as required;
amounts range from zero to seventy percent. If your output is a high dry ink/toner
coverage area on the output, you may want to enter a higher print density amount.
The system default value is 10%.
Tip
You may need to run several test prints, evaluate the output, and readjust the values
before achieving your desired output.

1 Sided-Face Down option

Select the Edit Settings button and the desired settings for one-sided only print jobs that
will exit the machine in the face-down position.
• 1 Sided Face Down Curl Correction: Select either Default or from Custom the
pull-down menu, select the setting that best describes the curl issues on your output.
• Front Print Density: Enter the desired print (dry ink/toner) density amount as required;
amounts range from zero to seventy percent. If your output is a high dry ink/toner
coverage area on the output, you may want to enter a higher print density amount.
The system default value is 10%.
Tip
You may need to run several test prints, evaluate the output, and readjust the values
before achieving your desired output.
Xerox ® Color 800i/1000i Presses Xerox
System Administration Guide
® Color 800/1000 Presses
Paper curl correction
4-3