Default Language; Change Administrator Password - Xerox Color 800i System Administration Manual

System Settings

Default Language

Use the Default Language feature to set the default to your desired language selection.
Language settings range depending on the Language File installed on the PC UI.
Note
Languages that are not installed on the PC UI cannot be selected through the Default
Language settings feature.
The language files loaded on your PC UI will vary from marketplace to marketplace. Use
the following procedure to change/set the default language for your machine:
1. Logon as Administrator.
2. Select the System Settings button.
3. From the User Interface tab, select the default language from the Default Language
pull-down menu.
4. Select OK to save your changes and close the System Settings window.
5. To exit the Administrator mode, select the Logoff button.
Related Topics:
Logging on as Administrator

Change administrator password

1. From the Logon window, enter the Administrator password and select OK.
For security reasons, only asterisks are displayed on the screen.
Note
The machine arrives from the factory with a default Administrator password of five
ones (11111). Use this default password to logon.
Tip
For security reasons, you should change the Administrator password from its default
password to a new one.
2. From the System Settings window, select the Change Password button from the
User Interface tab.
The Change Password window opens.
Tip
Use numbers only for creating your new password. Alpha characters (letters and other
characters, such as!*& are not allowed). A maximum of twelve numbers can be entered
for your password.
3. From the Change Password window, enter:
a) The old (current) password
b) The new password
c) Reenter the new password in the Confirm New Password area
d) Select OK
5-4 Xerox ® Color 800i/1000i Presses Xerox ® Color 800/1000 Presses
System Administration Guide