Remote Reception - Canon FAX-L160 Reference Manual

7.
Use the numeric keys to enter the memory lock
reception password (up to seven digits), then
press [OK].
Ex.
P A S S W O R D
1 2 3 4 5 6 7
If the memory lock password has already been set, press [
to go to the digit you want to change, and then press [Clear]. Enter a new
number with the numeric keys, then press [OK].
8.
Press [ ] or [ ] to select <MEMORY RX TIME>,
then press [OK].
If you do not need to set the timer for memory lock reception, skip to step
12.
9.
Press [ ] or [ ] to select <ON>, then press
[OK].
10.
For <MEM. RX START TIME>, use the numeric keys
to enter the start time (in 24-hour format), then
press [OK].
Ex.
M E M . R X S T A R T
11.
For <MEM. RX END TIME>, use the numeric keys to
enter the end time (in 24-hour format), then press
[OK].
12.
Press [Stop/Reset] to return to the standby mode.
] repeatedly
T I M E
0 0 : 0 0
Printing All Documents Stored in Memory
1.
Perform step 1 to 3 in "Memory Lock Reception,"
on p. 3-24.
2.
Press [ ] or [ ] to select <MEMORY LOCK>,
then press [OK].
3.
Use the numeric keys to enter the memory lock
reception password, then press [OK].
4.
Press [ ] or [ ] to select <OFF>, then press
[OK].
The received documents are printed.
5.
Press [Stop/Reset] to return to the standby mode.
■

Remote Reception

Remote reception enables you to use an external telephone connected
to the machine to receive faxes manually. This can be useful when the
machine is not nearby or is being used by someone else.
The default settings are as follows:
– REMOTE RX: <ON>
– REMOTE RX ID: <25>
3-25