Polling - Canon FAX-L160 Reference Manual

5.
Use the numeric keys, one-touch speed dialing
keys, coded speed dialing codes, or [Address
Book] key to enter a destination, then press [OK].
You can use the following features to send a fax by pressing [Add. Mode].
<BROADCAST>: Sends the same document to multiple recipients at once.
(See "Broadcasting, " on p. 3-28.)
<POLLING RX>: Retrieve documents stored in remote machines for
polling. (See "Polling Receiving, " on p. 3-30.)
<RELAY>: Sends a document to be relayed to other recipients. (See "Relay, "
on p. 3-30.)
6.
Press [Start] to scan the document for the Delayed
sending.
■

Polling

Polling Sending
Polling sending enables you to send a document in response to the
recipient machine's request.
You can store up to 30 documents in the memory.
1.
Set documents.
2.
Press [Add. Mode].
3.
Press [ ] or [ ] to select <POLLING TX>, then
press [OK].
4.
Press [ ] or [ ] to select <SINGLE> or
<MULTI>, then press [OK].
<SINGLE>: The document will be deleted after it is sent to a recipient.
<MULTI>: The document will be retained in memory until manually deleted.
5.
Use the numeric keys to enter the four-digit
subaddress, then press [OK].
If no subaddress is required, press [Start].
Ex.
S U B A D D R E S = 1 2 3 4 _
6.
Use the numeric keys to enter the four-digit
password, then press [OK].
If no password is required, press [Start].
Ex.
P A S S W O R D = 5 6 7 8 _
7.
Press [Start].
3-29