Advertisement
15.
CHARGER MAINTENANCE INSTRUCTIONS
15.1
Unplug the charger from the booster before attempting any maintenance or cleaning.
15.2
15.3
15.4
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent
16.
CHARGER MOVING AND STORAGE INSTRUCTIONS
Store the charger in an upright position, inside, in a cool, dry place.
17.
TROUBLESHOOTING – FOR CHARGER
PROBLEM
CHECK BATTERY (red) LED
on charger is on.
CHECK BATTERY (red) LED Indicates the charger is in
Booster shows 100% charge,
but charger still shows
charging (yellow LED).
18.
CHARGER SPECIFICATIONS
SCI200B Charger
Input
Output
Approximate Charging Time
Weight
POSSIBLE CAUSE
Charger is not making a good
connection to the booster.
Battery is defective (will not
accept a charge).
abort mode.
Unit needs more charge.
120–240V~, 50/60Hz, 0.47–0.28A
12V
24 hours
0.54 kg
10
REASON/SOLUTION
Check the connection. Make
sure the connection points are
clean.
Have the battery checked.
See Section 14.8.
Charge Booster until
the charger's green LED
comes on.
2A
Advertisement
