Setting Up Individual Ringer; Setting Up Individual Reply - Standard Horizon MATRIX GX3000S Owner's Manual

Repeat this procedure until all nine space of the MMSI number are en-
tered.
11. If a mistake was made entering in the name or the MMSI number repeat
pressing the [ H/L ( NAV )] key until the wrong character is selected, then
move the channel knob to correct the entry.
12. To store the data entered, press and hold the [ ENT ]
key.
13. To enter another individual address, repeat steps 4
through 12.
14. To exit this menu and return to radio operation mode press the [ 16/9 ] key.
Selecting "Next Next" or "Exit
Next Next
Next
number into memory.

11.5.2 Setting up Individual Reply

Allows setting up the radio to automatically (default setting) or manually re-
spond to a DSC Individual call requesting you to switch to a working channel
for voice communications. When Manual is selected the MMSI of the calling
vessel is shown allowing you to see who is calling. This function is similar to
caller id on a cellular phone.
1. Press and hold down the [ CALL ( MENU )] key until
"
Radio Setup Radio Setup Radio Setup Radio Setup Radio Setup
2. Turn the CHANNEL selector knob to select "
Setup Setup Setup " menu.
Setup Setup
3. Press the [ ENT ] key, then select "
the CHANNEL selector knob.
4. Press the [ ENT ] key.
5. Turn the CHANNEL selector knob to select "
or " ."
Manual Manual Manual
Manual Manual
6. Press the [ ENT ] key to store the selected setting.
7. To exit this menu and return to radio operation mode
press the [ 16/9 ] key.
Page 42
Exit" will automatically save the name and MMSI
Exit Exit
Exit
" menu appears.
NOTE
DSC DSC
DSC DSC DSC
" with
INDIV Reply INDIV Reply INDIV Reply
INDIV Reply INDIV Reply
Auto Auto Auto
Auto Auto
"
GX3000S