Time Offset - Standard Horizon MATRIX GX3000S Owner's Manual

12.3 TIME OFFSET

From the Factory the GX3000S shows GPS satellite time or UTC time. A time
offset is needed to show the local time in your area.
1. Press and hold down the [ CALL ( MENU )] key until
" Radio Setup Radio Setup
Radio Setup Radio Setup Radio Setup
2. Press the [ ENT ] key, then select "
"
Radio Setup Radio Setup Radio Setup Radio Setup Radio Setup
knob.
3. Press the [ ENT ] key.
4. Turn the CHANNEL selector knob to select time off-
set from UTC. See illustration below to find your off-
set time from UTC. If "
the same as UTC (Universal Time Coordinated or
GMT Greenwich Mean Time).
5. Press the [ ENT ] key to store the time offset.
6. To exit this menu and return to radio operation mode press the [ 16/9 ] key.
Page 60
" menu appears.
" menu with the CHANNEL selector
0:00 0:00 0:00 " is assigned, the time is
0:00 0:00
O
FFSET
Time Set Time Set Time Set " in the
Time Set Time Set
T T
IME ABLE
GX3000S