Time Location; True Magnetic Change (Nav Display) - Standard Horizon MATRIX GX3000S Owner's Manual

12.4 TIME LOCATION

This selection selects the time display between local time and UTC (time GPS
sends to radio). Time is displayed when GPS position (LAT/LON) is displayed
by press and holding the [ H/L ( NAV )] key.
1. Press and hold down the [ CALL ( MENU )] key until
" Radio Setup Radio Setup Radio Setup
Radio Setup Radio Setup
2. Press the [ ENT ] key, then select "
" Radio Setup Radio Setup
Radio Setup Radio Setup Radio Setup
knob.
3. Press the [ ENT ] key.
4. Turn the CHANNEL selector knob to select "
" Local Local Local ."
Local Local
5. Press the [ ENT ] key to store the selected setting.
6. To exit this menu and return to radio operation mode
press the [ 16/9 ] key.
In the local time mode, the display shows the time by the 12-hour system.
Meanwhile, the display shows the time by the 24-hour system in the UTC
mode.
12.5 TRUE MAGNETIC CHANGE ( NAV display )
This selection allows customizing the GPS COG (Course Over Ground) dis-
played on the LCD to be in True or Magnetic.
1. Press and hold down the [ CALL ( MENU )] key until
"
Radio Setup Radio Setup Radio Setup
Radio Setup Radio Setup
2. Press the [ ENT ] key, then select "
" Radio Setup Radio Setup
Radio Setup Radio Setup Radio Setup
knob.
3. Press the [ ENT ] key.
4. Turn the CHANNEL selector knob to select "
resenting "Magnetic") or "
5. Press the [ ENT ] key to store the selected setting.
6. To exit this menu and return to radio operation mode
press the [ 16/9 ] key.
GX3000S
" menu appears.
" menu with the CHANNEL selector
( "UTC" mode )
" menu appears.
" menu with the CHANNEL selector
Off Off Off " (representing "True").
Off Off
" in the
Time Disp. Time Disp. Time Disp. Time Disp. Time Disp.
UTC UTC " or
UTC UTC UTC
( "LOCAL" mode )
" in the
Magnetic Magnetic Magnetic Magnetic Magnetic
On On " (rep-
On On On
Page 61