Receiver Audio Tone Control - Standard Horizon MATRIX GX3000S Owner's Manual

8.8 RECEIVER AUDIO TONE CONTROL

Allows the treble and bass of the speaker audio to be adjusted for best listen-
ing in noisy enviroments. The effect is similar to adjusting a the treble and bass
controls on a stereo.
1. Press and hold down the [ CALL ( MENU )] key
until " Radio Setup Radio Setup Radio Setup
Radio Setup Radio Setup
2. Press the [ ENT ] key, then select "
CONT. CONT. " in the "
CONT. CONT. CONT.
CHANNEL selector knob.
3. Press the [ ENT ] key, then select "
the CHANNEL selector knob.
4. Turn the CHANNEL selector knob to select
desired audio responce in the lower frequency
range. Available selections are "
5. Press the [ ENT ] key to store the selected setting.
6. Select " TREBLE TREBLE TREBLE
TREBLE TREBLE
knob.
7. Turn the CHANNEL selector knob to select
desired audio responce in the highr frequency
range. Available selections are "
8. Press the [ ENT ] key to store the selected setting.
9. To exit this menu and return to radio operation mode press the [ 16/9 ] key.
Page 14
" menu appears.
Radio Setup Radio Setup " menu with the
Radio Setup Radio Setup Radio Setup
" with the CHANNEL selector
TONE TONE TONE TONE TONE
BASS BASS BASS " with
BASS BASS
– – – – – 6 6 6 6 6
" through " +6 +6
+6 +6 +6
– – – – – 6 6 6 6 6
" through "
+6 +6 +6
+6 +6
."
."
GX3000S