Scan Resume Time; Key Beep (On/Off) - Standard Horizon MATRIX GX3000S Owner's Manual

12.8 SCAN RESUME TIME

This selection is used to select the time the GX3000S waits after a transmis-
sion ends before starting scanning.
1. Press and hold down the [ CALL ( MENU )] key until
" Radio Setup Radio Setup
Radio Setup Radio Setup Radio Setup
2. Press the [ ENT ] key, then select "
the "
Radio Setup Radio Setup Radio Setup Radio Setup Radio Setup
tor knob.
3. Press the [ ENT ] key.
4. Turn the CHANNEL selector knob to select the de-
sired resume time. The resume time can be set to
" 1sec 1sec 1sec ," " 2sec 2sec 2sec
1sec 1sec 2sec 2sec
tion, the scanner will resume after the other station
stops transmitting (carrier drops).
5. Press the [ ENT ] key to store the selected setting.
6. To exit this menu and return to radio operation mode press the [ 16/9 ] key.
12.9 KEY BEEP ( ON/OFF )
This selection allows the key beep to be turned off.
1. Press and hold down the [ CALL ( MENU )] key until
" Radio Setup Radio Setup
Radio Setup Radio Setup Radio Setup
2. Press the [ ENT ] key, then select "
" Radio Setup Radio Setup
Radio Setup Radio Setup Radio Setup
knob.
3. Press the [ ENT ] key.
4. Turn the CHANNEL selector knob to select "
" Off Off ."
Off Off Off
5. Press the [ ENT ] key to set the key beep condition.
6. To exit this menu and return to radio operation mode
press the [ 16/9 ] key.
Emergency alarm and beeps for DSC operation cannot be turned OFF.
GX3000S
" menu appears.
" menu with the CHANNEL selec-
," " 3sec 3sec 3sec ," or " Off Off Off
3sec 3sec Off Off
" menu appears.
" menu with the CHANNEL selector
SCAN Resume SCAN Resume SCAN Resume
SCAN Resume SCAN Resume
." In the " Off Off Off " selec-
Off Off
Key Beep Key Beep Key Beep " in the
Key Beep Key Beep
On On On On On
NOTE
" in
" or
Page 63