Fog / Pa Operation; Operating The Pa Hail Mode; Operating The Fog Horn Mode - Standard Horizon MATRIX GX3000S Owner's Manual

25 watt vhf/fm itu class d dcs marine transceiver
Hide thumbs Also See for MATRIX GX3000S:
Table of Contents

Advertisement

14.2 PA/FOG OPERATION
The VH-310 Handset is capable of controlling the 30W Public address, 4 fog
horns, bells and whistles.
14.2.1 Operating the PA / Hailer
1. Press the [ F ] key followed by the [ 8 ( PA )] key, activate the
"PA / HAIL" mode.
2. Press the PTT switch and speak into the microphone.
3. To turn up the PA Volume, press the PTT switch and press
the [ ] or [ ] keys to adjust the Audio output level. The
level can be set from 0 to 30W.
4. To adjust the listen back volume, (while in listenback mode)
press the [ VOL ] Key, then press the [ ] or [ ] key to the
desired listen back volume.
To exit from the PA / Hailer mode, press the [ F ] key followed by the [ 8 ( PA )] key
again.
14.2.2 Operating the FOG Horn
The GX3000S is capable of sending Underway, Stop, Sail, Tow, Horn, Siren,
Aground and Anchor signals.
1. Press the [ F ] key followed by the [ 9 ( FOG )] key, activate the
"FOG HORN" menu.
2. Select the one of the eight functions described above with
the [ ] or [ ] key and press the [ ENT ] key.
3. On the "
Horn
Horn
Horn
Horn
Horn
activate the tone through the HAIL/PA speaker.
Press the [ ] or [ ] keys to adjust the Audio output level.
The level can be set from 0 to 30W.
4. To adjust the listen back volume, (while in listenback mode)
press the [ VOL ] Key, then press the [ ] or [ ] key to the
desired listen back volume.
To exit from the FOG HORN mode, press the [ F ] key followed
by the [ 9 ( FOG )] key again.
Page 78
" and "
" modes, press the PTT switch to
Siren
Siren
Siren
Siren
Siren
GX3000S

Advertisement

Table of Contents
loading

Table of Contents