10.16 VOICE SCRAMBLER
If privacy of communications is desired, a CVS2500 voice scrambler (VS) can
be installed in the transceiver. Contact your Dealer to have a CVS2500 in-
stalled. Refer to the section 12.11 VOICE SCRAMBLER to program the voice
scrambler.
1. Turn on the transceiver.
2. Select a channel that was programmed for scram-
bler mode ("VS" will appear on the LCD).
If a channel is not set for the voice scrambler, the
display will be as shown in the illustration at the
right ("VS" will disappear from the LCD).
If a voice scrambler is canceled temporarily in
the "SETUP" menu, the display will be as shown
in the illustration at the right.
3. Monitor the channel before transmitting.
4. Transmit the voice message. The signal sent will
be scrambled.
Page 34
GX3000S