Set Mask Areas - Panasonic WV-SW550 Series Operating Instructions Manual

•
Default: 128
[Blue gain]
Adjust the blue color of images.
When the cursor is moved in the "+" direction, the blue color will become thicker. When the cursor is moved
in the "-" direction, the blue color will be thinner. Click the [Reset] button to reset the color to the default.
•
Default: 128
[DNR]
The digital noise reduction function reduces noise automatically under the condition of low illuminance. Select
an effect level "High" or "Low" for the digital noise reduction.
•
High: High DNR, increases afterimage
•
Low: Low DNR, reduces afterimage
•
Default: High
[Chroma gain level]
Adjusts the chroma level (color density).
When the cursor is moved in the "+" direction, the colors will become thicker. When the cursor is moved in the
"-" direction, the colors will be thinner. Click the [Reset] button to reset the color to the default.
•
Default: 128
[Aperture level]
Adjust the aperture level (outline compensation).
Images will be sharper when the cursor is moved in the "+" direction, and will be softer when the cursor is
moved in the "-" direction. Click the [Reset] button to reset the color to the default.
•
Default: 16
[Pedestal level]
Adjust the black level of images by moving the cursor.
When the cursor is moved to the "+" direction, images will become brighter. When the cursor is moved to the
"-" direction, images will be darker. Click the [Reset] button to reset the color to the default.
•
Default: 128
[Close] button
Click this button to quit the "Image adjust" setup menu.

11.4.2 Set mask areas

When "Off" is selected for "Super Dynamic(SD)" and "Back light compensation (BLC)", it is possible to
compensate for backlight by masking brighter areas.
11 Configure the settings relating to images and audio [Image/Audio]
Operating Instructions 97