Panasonic WV-SW550 Series Operating Instructions Manual page 122

13 Configure the alarm settings [Alarm]
•
The motion detection function is not the dedicated function to prevent thefts, fires, etc. We are not
responsible for any accidents or damages that may occur.
[Area]
When selecting a VMD area in the screen, it will be numbered as area 1. (Subsequent areas will be numbered
in the order of selection.)
[Status]
Select "On" or "Off" to determine whether or not to perform video motion detection.
•
On: Performs video motion detection.
•
Off: Does not perform video motion detection.
•
Default: Off
[Detection area]
Adjust the size of the VMD area using the slider. The smaller the selected value is, the higher the sensitivity
of VMD area becomes. The current value (1-10) will be displayed on the right of the slider.
122 Operating Instructions