Accessories; Oven Light - Rangemaster Professional+ FXP 90 Dual Fuel User's Manual & Installation Instructions

Accessories

Each oven is supplied with:
• Two full capacity shelves (Fig. 2.35)
Grill pan tray support (Fig. 2.36)
•
Two grill pans with trivets (Fig. 2.37)
•
• Three energy saving shelves (Fig. 2.38)
Four ladder shelf supports (Fig. 2.39)
•
And one divider (Fig. 2.40)
•
Oven Shelves
Any shelf can be fitted in any of the positions. The oven
shelves are retained when pulled forward but can be easily
removed and refitted.
To Remove and Refit the Ladder Shelf Supports
Lift the ladder support hooks out of the two locating holes in
the oven side (or divider) before lifting the support clear of
the bottom ladder restraint.
Refit by inserting the bottom of the ladder into the restraint
before fitting the hooks through the locating holes.
To Remove and Refit the Shelves
Pull the shelf forwards until the back of the shelf is stopped
by the shelf support (Fig. 2.41). Lift up the front of the shelf
so the back of the shelf will pass between the supports and
then pull the shelf forward (Fig. 2.42).
Refit in the reverse order, making sure to push it fully back.

Oven Light

Press the button to turn on the oven lights (Fig. 2.43).
If one of the oven lights fail, turn off the cooker power supply
before you change the bulb. See the 'Troubleshooting' section
for details on how to change an oven light bulb.
Fig. 2.35
ArtNo.326-0013 - Full capacity shelf
(Falcon)
Fig. 2.37
ArtNo.331-0008 - 90SC
grill pan & trivet
Fig. 2.39
ArtNo.320-0031 90SC
removing the shelf 1
ArtNo.320-0032 90SC
removing the shelf 2
11
ArtNo.326-0004 - Cradle shelf
ArtNo.326-0002 - Energy saving shelf
ArtNo.281-0028 - Albertine divider
ArtNo.320-0017
Main oven light
Fig. 2.36
Fig. 2.38
Fig. 2.40
Fig. 2.41
Fig. 2.42
Fig. 2.43