The Clock - Rangemaster Elan 110 Dual Fuel User's Manual & Installation Instructions

The Clock

The clock must be set to the time of day before the oven
will work.
1. Once the cooker is connected and switched on, the
display will start to flash.
2. To set the time, turn and hold the Timer (A) knob to
the Clock (C) setting and at the same time turn the
Adjusting (B) knob either clockwise or counter-clockwise
(Fig. 2.22).
3. Once you have set the time release the Timer (A) knob.
Setting the Minute Minder
A Minute Minder (E) is a feature that can be set for a number
of minutes and sounds an alarm once the specified amount
of time has elapsed.
1. Turn the Timer (A) knob to the Minute Minder (E)
setting (Fig. 2.23).
2. Turn the Adjusting (B) knob to set the amount of time
required. e.g. 20 seconds (Fig. 2.24).
3. Turn the Timer (A) knob to the Manual (D) setting to
see the current time and the 'Bell' symbol on the display
(Fig. 2.25).
Cancel the Timer Alarm
Once the specified time has elapsed it will emit an alarm.
There are two ways to cancel the alarm:
1. Turn the Adjusting (B) knob counter-clockwise or
clockwise (Fig. 2.26).
2. Turn either the Timer (A) knob to the Clock (C) or to the
Minute Minder (E) setting. Return to Manual (D) for
normal cooking mode (Fig. 2.26).
If the alarm is not manually switched off it will stop after
approximately 2 minutes.
NOTE
C
A – Timer knob, B – Adjusting knob
Fig. 2.23
ArtNo.300-0005 2BC
minute minder setting
E
A
C
C
9
ArtNo.300-0005 2BC
minute minder setting
A B
ArtNo.300-0006 2BC
minute minder setting 2
A
B
ArtNo.300-0006 2BC
minute minder setting 2
D
E
A B
ArtNo.301-0007 2BC
Stopping the oven 1
D
E
A B
Fig. 2.22
Fig. 2.24
B
Fig. 2.25
Fig. 2.26