Program 22 : Incoming Call Setup; System Options For Incoming Calls - NEC SL1100 Programming Manual

SL1100
Level:
IN
Description
Use Program 22-01 : System Options for Incoming Calls to define the system options for incoming
Program
calls.
22
Input Data
Item
No.
01 Incoming Call
Priority
02 Incoming Call
Ring No Answer
Alarm
03 Ring No Answer
Alarm Time
04 DIL No Answer
Recall Time
06 DID Ring-No-An-
swer Time
07 DID Incoming
Ring Group No
Answer Time
08 DID Pilot Call No
Answer Time
09 DID to Trunk to
Trunk no answer
timer
10 VRS Waiting
Message Opera-
tion
2-254

Program 22 : Incoming Call Setup

22-01 : System Options for Incoming Calls

Item Input Data
0 = Intercom Call Priori-
ty
1 = Trunk Call Priority
0 = Disable (Off)
1 = Enable (On)
0 ~ 64800 seconds
0 ~ 64800 seconds
0 = No Overflow
0 ~ 64800 seconds
0 ~ 64800 seconds
0 ~ 64800 seconds
0 ~ 64800 seconds
0 = Enable Always
1 = Change by Manual
Operation
Description
Use this option to determine if Inter-
com calls or trunk calls have answer
priority when both are ringing simul-
taneously.
If enabled, an incoming call that
rings longer than the Ring No An-
swer Alarm interval (22-01-03),
changes to a unique ring cadence to
indicate that the call has been ring-
ing too long. If disabled, this does
not occur.
If a trunk rings a multiline telephone
longer than this interval, the system
changes the ring cadence. This indi-
cates to the user that the call has
been ringing too long.
A DIL that rings its programmed
destination longer than this interval
diverts to the DIL No Answer Ring
Group (set in Program 22-08).
In systems with DID Ring-No-An-
swer Intercept, this sets the Ring-
No-Answer time. This time is how
long a DID call rings the destination
extension before rerouting to the in-
tercept ring group.
Set up the operation mode for Auto
Attendant and Queuing Message.
Program 22 : Incoming Call Setup
ISSUE 4.0
Default Related
Program
1 15-02-22
0 22-01-03
22-01-04
60 22-01-02
0
20 22-12
20
60
20
0 22-14
22-15
22-08
22-04
22-01-04
20-15-11
15-07