NEC SL1100 Programming Manual page 148

SL1100
Item
No.
05 Transfer Key Op-
eration Mode
06 Hold Key Operat-
ing Mode
07 Automatic Hold
for CO Lines
Program
15
08 Automatic
Handsfree
09 Auto answer to
incoming call
from Extension
10 Ringing Line
Preference for
Trunk Calls
11 Callback Auto-
matic Answer
12 Off-Hook Ringing 0 = Muted Off-Hook
13 Redial List Mode
15 Storage of Call-
er-ID for an-
swered call
16 Handsfree Oper-
ation
18 Power-Saving
Mode
2-128
Item Input Data
0 = Transfer
1 = Call back
2 = Hook
0 = Normal (Common)
1 = Exclusive Hold
0 = Hold
1 = Disconnect (Cut)
0 = Preselect
1 = One-Touch (Auto-
matic Handsfree)
0 = Off
1 = On
0 = Idle (Off)
1 = Ringing (On)
0 = Off
1 = On
Ringing
1 = No Off-Hook Ring-
ing
3 = Beep in Speaker
(SP)
4 = Beep in Handset
(HS)
5 = Speaker and Hand-
set Beep
0 = ICM/Trunk (Exten-
sion/Trunk Mode)
1 = Trunk Mode
0 = Disable (Off)
1 = Enable (On)
0 = Disable (Off)
1 = Enable (On)
0 = Normal mode
1 = Power-Saving
Mode (Eco-Mode)
Description
Use this option to set the operating
mode of the extension Transfer key.
The keys can be for Call Transfer,
Serial Calling or Flash. When select-
ing the Flash option (selection 2),
refer also to Program 81-01-14.
Use this option to set the function of
the Multiline Hold key. The Hold key
can activate normal Hold or Exclu-
sive Hold.
When talking on a CO call and an-
other CO line key is pressed, the
original trunk is placed on Hold (0)
or Disconnected (1).
Use this option to set whether
pressing a key access a One-Touch
Key or if it preselects the key.
Use this option to select between
Idle and Ringing Line Preference for
trunk calls.
Use this option to enable or disable
automatic answer of calls recalling
to a station. For example, if a Trans-
fer Recall or Hold Recall is ringing
back to a station, the following hap-
pens:
If Program 15-02-11 is enabled, the
station will automatically answer the
recall when it goes off-hook. If Pro-
gram 15-02-11 is disabled, a station
does not automatically answer the
recall when it goes off-hook. The
user must first press the line ap-
pearance of the recalling call or
press the answer key.
Use this option to set the telephone
Off-hook signaling. Off-hook signal-
ing occurs when a telephone user
receives a second call while busy on
a handset call. To enable/disable
Off-hook signaling for an extension
Class of Service, use Program
20-13-06.
Select whether the Redial List fea-
ture should store internal and exter-
nal numbers (0), or only external
numbers (1).
Enable or disable an extension abili-
ty to use the speakerphone on out-
side calls. When disabled, users can
hear the conversation, but cannot
respond handsfree.
Program 15 : Extension, Basic Setup
ISSUE 4.0
Default Related
Program
0
0
1
1
1
1
1
5
0
1
1
1