Dial Analysis Table For Ars/F-Route Access - NEC SL1100 Programming Manual

ISSUE 4.0

44-02 : Dial Analysis Table for ARS/F-Route Access

Level:
IN
Description
Use Program 44-02 : Dial Analysis Table for ARS/F-Route Access to set the Pre-Transaction
Table for selecting ARS/F-Route.
Input Data
Dial Analysis Table Number
Item Item
No.
01 Dial
02 Service Type
03 Additional Data
Programming Manual
Program 44 : ARS/F-Route Setup
Input Data
Up to eight digits Set the number of digits to be analyzed by
(Use line key 1 for a the system for ARS routing.
Don't Care digit, @)
0 = No setting (None) • Service Type 1 (Extension Number)
1 = Extension Call (Own) The number goes to an extension after
2 = ARS/F-Route Table deleting the front digit(s).
(F-Route) Additional Data
3 = Dial Extension Ana- Assign the digit(s) to be deleted on top
lyze Table (Option) of the number for extension number us-
age. At least one digit must be deleted.
• Service Type 2 (ARS/F-Route)
The number is controlled by ARS/F-
Route table.
Additional Data:
If the ARS/F-Route Time Schedule is
not used, assign the ARS/F-Route table
number for Program 44-05.
If the ARS/F-Route Time Schedule is
used, assign the ARS/F-Route selection
number for Program 44-04.
• Service Type 3 (Dial Extension Analyze
Table)
The total length of the number exceeds
more than 8 digits.
Additional Data:
Assign the Dial Extension Analysis Ta-
ble number to be used in Program
44-03.
1 = Delete Digit = 0 ~ For the Service Type selected in 44-02-02,
255 (255 = Delete All enter the additional data required.
Digits) • 1 : Delete Digit = 0 ~ 255
2 = 0 ~ 100 (0 = No Set- (255 = Delete All Digits)
ting) • 2 : [Program 44-01 : 0]
3 = Dial Extension Ana- ARS/F-Route Table Number = 0 ~ 100
lyze Table Number = 0 ~ (0 = No Setting)
4 (0 = No Setting) Refer to Program 44-05.
[Program 44-01 : 1]
ARS/F-Route Select Table Number = 0
~ 100 (0 = No Setting)
Refer to Program 44-04.
• 3 : Dial Extension Analyze Table Num-
ber = 0 ~ 4 (0 = No Setting)
Refer to Program 44-03.
001 ~ 120
Description
SL1100
Program
44
Default
No Setting
0
0
2-389