Analog Audio - Insignia NS-48D420NA16 User Manual

NS-48D420NA16 Insignia 48" 1080p 60Hz LED TV

Analog audio

Note
When you connect an analog system or sound bar to the
jack, the TV speakers are muted.
On your TV
Audio cable
connector
/AUDIO OUT
jack
1 Make sure that your TV's power cord is unplugged and the analog speaker system or sound bar is turned off.
2 Connect an audio cable (not provided) to the
analog speaker system or sound bar.
3 Plug your TV's power cord into a power outlet, then turn on your TV.
4 Turn on the analog speaker system or sound bar, then set it to the correct source. For more information, see the
documentation that came with the analog speaker system or sound bar.
5 On your TV, set the Headphone/Audio Out option on the Audio menu to Headphones/Audio Out Variable or
Audio Out Fixed. See the Headphone/Audio Out option in
Audio cable
Analog speaker system
Sound bar
/AUDIO OUT jack on your TV and to the AUDIO IN jacks on the
www.insigniaproducts.com
/AUDIO OUT
Side of TV
Adjusting sound settings on page 47.
28