Analog Audio Using The Audio Out Jack - Insignia NS-43DR620NA18 User Manual

NS-43DR620NA18 / NS-50DR620NA18 / NS-55DR602NA18/NS-65DR620NA18
NS-43DR620CA18 / NS-50DR620CA18 / NS-55DR620CA18

Analog audio using the AUDIO OUT jack

When you connect an analog speaker system or soundbar to the AUDIO OUT jack, sound plays through the TV speakers
and the audio device.
On your TV
Audio cable
connector
AUDIO OUT
jack
1 Make sure that your TV's power cord is unplugged and the analog speaker system or soundbar is turned off.
2 Connect an audio cable (not provided) to the AUDIO OUT jack on the back of your TV and to the AUDIO IN jacks on
the analog speaker system or soundbar.
3 Plug your TV's power cord into a power outlet, then turn on your TV.
4 Turn on the analog speaker system or soundbar, then set it to the correct source. For more information, see the
documentation that came with the analog speaker system or soundbar.
Note
Use the volume controls on the analog speaker system or soundbar to
control the volume.
34
Analog speaker system
Soundbar
Audio cable
www.insigniaproducts.com
Back of TV