Analog Audio - Insignia NS-24D510NA15 User Manual

Analog audio

When you connect an analog system or a sound bar to the AUDIO OUT/
On your TV
Audio cable
connector
AUDIO OUT/
jack
1 Make sure that your TV's power cord is unplugged and the analog speaker system or sound bar is turned off.
2 Connect an audio cable (not provided) to the AUDIO OUT/
jacks on the analog speaker system or sound bar.
3 Plug your TV's power cord into a power outlet, then turn on your TV.
4 Turn on the analog speaker system or sound bar, then set it to the correct source. For more information, see the
documentation that came with the analog speaker system or sound bar.
5 On your TV, set the Headphones/Audio Out option on the AUDIO menu to Headphones/Audio Out Variable
or Audio Out Fixed . See the Headphones/Audio Out option in
Analog speaker
system
Sound bar
www.insigniaproducts.com
Side of TV
Audio cable
jack on the side of your TV and to the AUDIO IN
"Adjust sound
NS-24D510NA15 Insignia 24" LED TV
jack, the TV speakers are muted.
settings" on page 53.
33