Updating The Tv Firmware; Customizing Tv Settings - Insignia NS-48D420NA16 User Manual

Updating the TV firmware

If your TV is behaving oddly and you have tried all the
solutions in the troubleshooting pages, you may need
to update the TV firmware.
Cautions
• Make sure that you have tried all other
solutions before you upgrade the
firmware.
• While the firmware is updating, do not
turn off your TV.
Note
To update the TV firmware, you need a:
• Computer with an available USB port
• High-speed Internet connection
• USB flash drive
1 On the Help menu, select System Info, then write
down your model, revision, and firmware
information. See
page 62.
2 On a computer, go to www.insigniaproducts.com,
then click Support & Service. Enter
NS-48D420NA16 in the box under Manual,
Firmware, Drivers & Product Information, then
click .
3 Follow the instructions in the Firmware Installation
Guide on the Insignia website to download the
firmware update and copy it to a USB flash drive.
4 Plug the USB flash drive into the USB port on your
TV.
5 Press MENU.
6 Press or to highlight HELP, then press
ENTER.
7 On the Help menu, press
Update Firmware, then press ENTER or . A
message asks if you want to update the TV
firmware.
8 Highlight OK, then press ENTER.
While your TV installs the firmware update, your
TV displays a status screen. Do not turn off your
TV until the update is complete.
63
Viewing system information
or to highlight
www.insigniaproducts.com
9 When the update is complete, unplug the USB
flash drive, then press ENTER. Your TV turns off
then on to complete the update.
10 If the channel list has been deleted, you need to
scan for channels. For more information, see
Automatically scanning for channels

Customizing TV settings

If you did not complete the customization part of the
Easy Setup wizard the first time you turned on your TV,
on
you can run the wizard again to customize settings.
When you run the Easy Setup wizard, your TV will not
reset any changes you made on the Picture, Audio,
Channels, or Settings menu. The wizard will scan for
channels and replace the channel information stored
on your TV.
1 Press MENU.
2 Press
ENTER.
or
3 Press
press ENTER or . A message asks if you want to
run the Easy Setup wizard.
4 Press
not reset), then press ENTER.
If you select OK, your TV turns off, then turns on
again. Go through the Easy Setup wizard. For more
information, see
time
OR
If you select Cancel or press MENU, your TV
returns to the Help menu without making any
changes.
OR
If you press EXIT, the on-screen menu closes
without making any changes.
Insignia 48" 1080p 60Hz LED TV
Note
• If you see a message that says the
firmware file is incorrect, make sure
that you have downloaded the correct
file for your model.
• If you see a message that says the
update failed or the TV screen is blank
and the power LED is blinking red
then blue, turn off your TV, turn it back
on, then run the upgrade again.
or to highlight HELP, then press
or to highlight Customize my TV, then
or to select OK (to reset) or Cancel (to
Turning on your TV for the first
on page 33.
on page 49.
or