Av (Composite Video) (Good) - Insignia NS-48D420NA16 User Manual

NS-48D420NA16 Insignia 48" 1080p 60Hz LED TV

AV (composite video) (good)

Notes
On your TV
AV cable Audio cable
connector connectors
AV jack Analog
audio jacks
1 Make sure that your TV's power cord is unplugged and the DVD or Blu-ray player is turned off.
2 Connect an AV cable (not provided) to the green VIDEO/Y jack and L and R AUDIO jacks on your TV and to the AV
OUT jacks on the DVD or Blu-ray player.
Important
3 Plug your TV's power cord into a power outlet, then turn on your TV and DVD or Blu-ray player.
4 Press INPUT to open the INPUT SOURCE list.
5 Press or to select Component/AV, then press ENTER.
• Cables are often color-coded to match color-coded jacks.
• The yellow video connector on the AV cable connects to the green
VIDEO/Y jack.
DVD or
Blu-ray player
• The VIDEO/Y, P , and P
B
device) share the L and R AUDIO jacks with the VIDEO/Y jack (used to
connect an AV device). You can only connect one component video or
AV device at a time. We suggest upgrading to HDMI if your DVD or
Blu-ray player supports it.
• When you connect the audio using the L and R AUDIO jacks, the audio
output is analog.
www.insigniaproducts.com
AV cable
video jacks (used to connect a component
R
Side of TV
20