Restoring Settings To The Defaults; Video And Audio - Insignia NS-48D420NA16 User Manual

NS-48D420NA16 Insignia 48" 1080p 60Hz LED TV

Restoring settings to the defaults

When you restore default settings, all the settings you
have customized (except parental controls) are reset.
1 Press MENU.
2 Press or to highlight HELP, then press
ENTER.
3 Press or to highlight Reset to Default, then
press ENTER or .
4 Press or to select OK (to reset) or Cancel (to
not reset), then press ENTER.
If you select OK, your TV turns off, then turns on
again. Go through the Easy Setup wizard. For more
information, see
time on page 33.
OR
If you select Cancel or press MENU, your TV
returns to the Help menu without making any
changes.
OR
If you press EXIT, the on-screen menu closes
without making any changes.
Turning on your TV for the first
www.insigniaproducts.com

Video and audio

Problem
Picture does not
fill the screen.
or
There are black
bars around the
picture.
No picture (screen
is not lit) and no
sound.
Solution
• Press ASPECT to change the
aspect ratio. See the "Aspect
Ratio" option in Adjusting the
TV picture on page 44.
• Press on the TV or the
remote control.
• Make sure that the Audio Only
option is set to Off. See
TV audio only on page 48.
• Make sure that the video cables
are connected correctly and
securely to your TV.
• Adjust the contrast and
brightness. See Adjusting the
TV picture on page 44.
• Make sure that the power cord
is plugged into a working
outlet.
• Press INPUT and make sure that
the correct video input source is
selected. See Selecting the
video input source on page 35.
• Try another channel. The station
may be experiencing problems.
• Make sure that the incoming
signal is compatible.
• Make sure that the antenna or
cable TV is connected correctly
and securely. See Connecting a
cable or satellite box
page 13 or Connecting an
antenna or cable TV (no box)
page 17.
• Check the closed caption
settings. Some TEXT modes can
block the screen. See
closed captioning on page 56.
Playing
on
on
Using
64