Connecting A Dvd Or Blu-Ray Player; Hdmi (Best) - Insignia NS-48D420NA16 User Manual

NS-48D420NA16 Insignia 48" 1080p 60Hz LED TV

Connecting a DVD or Blu-ray player

Many DVD or Blu-ray players have more than one connection type. To get the best video, you should use the best
connection type available. For more information, see
You can connect a DVD or Blu-ray player using:

• HDMI (best)

• Component video (better)
• AV (composite video) (good)
HDMI (best)
On your TV
HDMI cable
connector
HDMI jack
1 Make sure that your TV's power cord is unplugged and the DVD or Blu-ray player is turned off.
2 Connect an HDMI cable (not provided) to an HDMI jack on your TV and to the HDMI OUT jack on the DVD or Blu-ray
player.
3 Plug your TV's power cord into a power outlet, then turn on your TV and DVD or Blu-ray player.
4 Press INPUT to open the INPUT SOURCE list.
5 Press or to highlight HDMI1 or HDMI2, then press ENTER.
Note
An HDMI cable carries both audio and video. You do not need to use any
audio cables.
What connection should I use?
DVD or Blu-ray
player
HDMI cable
www.insigniaproducts.com
on page 12.
Side of TV
18