You can configure the time zone settings of your access point here. The date
and time of the device can be configured manually or can be synchronized
with a time server.
Date and Time Settings
Local Time
Acquire Current
Time from your PC
NTP Time Server
Use NTP
Server Name
Update Interval
Time Zone
Time Zone
Set the access point's date and time manually
using the drop down menus.
Click "Acquire Current Time from Your PC" to
enter the required values automatically
according to your computer's current time and
date.
The access point also supports NTP (Network
Time Protocol) for automatic time and date
setup.
Enter the host name or IP address of the time
server if you wish.
Specify a frequency (in hours) for the access
point to update/synchronize with the NTP
server.
Select the time zone of your country/ region. If
your country/region is not listed, please select
another country/region whose time zone is the
same as yours.
193
Edimax Pro NMS