Edimax CAP1200 User Manual page 115

Orange
Yellow Connecting
Green Connected
Blue
Each Managed AP has "Action" icons with the following functions:
1. Disallow
Remove the Managed AP from the AP array and disable connectivity.
1. Edit
Edit various settings for the Managed AP (refer to IV-5-1. Access Point).
2. Blink LED
The Managed AP's LED will flash temporarily to help identify & locate
access points.
3. Buzzer
The Managed AP's buzzer will sound temporarily to help identify & locate
access points.
4. Network Connectivity
Go to the "Network Connectivity" panel to perform a ping or traceroute.
use the AP Controller's firmware upgrade
function (refer to IV-5-7. Firmware
Upgrade).
Please wait while the Managed AP makes
Configuring or
configurations or while the firmware is
Upgrading
upgrading.
Please wait while Managed AP is
connecting.
Managed AP is connected.
Managed AP is waiting for approval.
Refer to IV-5-1. Access Point: Auto
Waiting for Approval. Note: Eight Managed APs are
Approval supported. Additional APs will display this
status until an existing Managed AP is
removed.
109
Edimax Pro NMS