Edimax CAP1200 User Manual page 162

VLAN ID
Auto Channel
Auto Channel Range Select a range from which the auto channel
Auto Channel
Interval
Channel Bandwidth
BSS BasicRateSet
When auto channel is disabled, select a wireless channel manually:
Channel
Channel Bandwidth
BSS BasicRate Set
to 16). The SSID can consist of any
combination of up to 32 alphanumeric
characters.
Specify a VLAN ID for each SSID.
Enable/disable auto channel selection. Auto
channel selection will automatically set the
wireless channel for the access point's 2.4GHz
frequency based on availability and potential
interference. When disabled, select a channel
manually as shown in the next table.
setting (above) will choose a channel.
Specify a frequency for how often the auto
channel setting will check/reassign the
wireless channel. Check/uncheck the "Change
channel even if clients are connected" box
according to your preference.
Set the channel bandwidth: 20MHz (lower
performance but less interference), 40MHz
(higher performance but potentially higher
interference) or Auto (automatically select
based on interference level).
Set a Basic Service Set (BSS) rate: this is a
series of rates to control communication
frames for wireless clients.
Select a wireless channel from 1 – 11.
Set the channel bandwidth: 20MHz (lower
performance but less interference), 40MHz
(higher performance but potentially higher
interference) or Auto (automatically select
based on interference level).
Set a Basic Service Set (BSS) rate: this is a
series of rates to control communication
frames for wireless clients.
156
Edimax Pro NMS