Edimax CAP1200 User Manual page 126

Default Gateway
Primary DNS
Secondary DNS
Radio Settings
Wireless
Band
Auto Pilot
For DHCP users, select "From DHCP" to get
default gateway from your DHCP server or
"User-Defined" to enter a gateway manually.
For static IP users, the default value is blank.
DHCP users can select "From DHCP" to get
primary DNS server's IP address from DHCP or
"User-Defined" to manually enter a value. For
static IP users, the default value is blank.
DHCP users can select "From DHCP" to get
secondary DNS server's IP address from DHCP
or "User-Defined" to manually enter a value.
For static IP users, the default value is blank.
Enable or disable the access point's 2.4GHz or
5GHz wireless radio. When disabled, no SSIDs
on that frequency will be active.
Select the wireless standard used for the
access point. Combinations of 802.11b,
802.11g, 802.11n & 802.11ac can be selected.
Enable/disable auto channel selection. Auto
120
Edimax Pro NMS